Particle focusing is an important functionality useful in a wide set of biological applications. Nevertheless, it is still challenging to realize it in microfluidics, especially in a low pressure system, because of the intrinsic 2D nature of standard microfluidic devices; long channels or complicated device geometries with several lateral channels are usually needed to avoid this limitation. In this work we present a compact microfluidic chip, which is capable to perform 3D particle focusing at high flow rates, thanks to the superposition of inertial focusing and intense Dean flow in tightly curving 3D channels. The device layout comprises alternating helices and straight channel sections permitting particle focusing with driving pressures < 1 bar due to the compactness of this chip. The complete device optimization and validation is presented, demonstrating the capability of the chip to effectively focus the sample using a single inlet, with no need of additional lateral channels that complicate the sample processing procedure. Moreover, the device layout facilitates a parallelization of channels, with the positive consequence to speed up the time needed to process the sample. Femtosecond laser micromachining followed by chemical etching is used to fabricate the device. This technique is a two-step process that permits fabrication of 3D structures in fused silica substrates and it is a fundamental tool to obtain 3D helices in the substrate. A surface fabrication approach has been used to avoid tapered channels. We envisage the use of this chip for high speed flow cytometer applications.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Petra Paiè ; Francesca Bragheri ; Dino Di Carlo ; Roberto Osellame
[-] Author Affiliations
Petra Paiè, Francesca Bragheri, Roberto Osellame
CNR-Istituto di Fotonica e Nanotecnologie (Italy)
Dino Di Carlo
Univ. of California, Los Angeles (United States)
Proc. SPIE 10061, Microfluidics, BioMEMS, and Medical Microsystems XV, 1006109 (April 20, 2017); doi:10.1117/12.2251941