[Thesis] Validation of a Confocal Light Sheet Microscope using Push Broom Translation for Biomedical
There exists a need for research of optical methods capable of image cytometry suitable for point-of-care technology. To propose am optical approach with no moving parts for simplification of mechanical components for the further development of the technology to the poin-of-care, a linear sensor with push broom translation method. Push broom translation is a method of moving objects by the sensor for an extended field of view. A polydimethylsiloxane (PDMS) microfluidic chamber with a syringe pump was used to deliver objects by the sensor. The volumetric rate of the pump was correlated to the integration time of the sensor to ensure images were realistically being formed, termed aspect ratio. An electro-chemical microfluidic system was then also investigated, redox-magnetohydrodynamics (R-MHD), to eliminate the mechanical syringe pump which showed deviations in linear speeds at the specimen plane. To image with adequate signal to background ratio within the deep chamber of the R-MHD device, an epitaxial light sheet confocal microscope (e-LSCM) was used to improve axial resolution. The linear sensor, having small pixels, blocked out-of-plane light while eliminating the need for a mechanical aperture which is used for traditional point-scanning confocal microscopy. The particular linear sensor used has binning modes that were used to vary the axial resolution by increasing the sensor aperture. This approach was validated by using a mirror translated in the axial direction and measuring remitted light intensity. The resulting curve estimated the real axial resolution of the microscope, which compared favorably to theoretical values. The R-MHD and the e-LSCM were then synchronized to perform continuous imaging of fluorescent microspheres and cells in suspension. This study combines epitaxial light sheet confocal microscopy and electro-chemical microfluidics as a robust approach which could be used in future point-of-care image cytometry applications.
Date of Graduation 5-2016 Document Type Thesis Degree Name Master of Science in Biomedical Engineering (MSBME) Degree Level Graduate Department Biomedical Engineering Advisor Timothy J. Muldoon Committee Member Ingrid Fritsch Second Committee Member Kartik Balanchandran
Recommended Citation Hutcheson, Joshua, "Validation of a Confocal Light Sheet Microscope using Push Broom Translation for Biomedical Applications" (2016). Theses and Dissertations. 1554. http://scholarworks.uark.edu/etd/1554